Replacement SPST momentary footswitch for any Red Panda pedal with soft touch switches. Includes nuts and washers.
This does not work with the Particle V1, Context V1, Bitmap V1, or Raster V1. Please email support@redpandalab.com if you need a replacement switch for one of those products.
The switch is user replaceable with no soldering required. You will need a Phillips head screwdriver and a 15mm socket, nut driver, or an adjustable wrench.
- Remove the 4 bottom screws and take off the bottom plate.
- Unplug the original switch from the circuit board.
- Remove the switch from the enclosure.
- Install the replacement switch in the enclosure.
- Plug in the replacement switch.
- Replace the bottom plate and reinstall the 4 screws.
